1 689 988 238
2012-11-06
|
Robert Bosch GmbH
Commissioning | ACS 651/751 | 83
en
23.
Remove the service hatch on the right panel.
24.
Check the shut off valves (Fig. 23, Pos. 1 and 3) on
the internal refrigerant cylinder. If the valves are
closed,
turn anticlockwise and
open the valves.
1
2
3
459897_8Nkv
Fig. 23: Internal refrigerant cylinder
1,3 Shut off valves
2 Manual air purge valve
4.3
ACS 651/751 switch-on
1.
Move the ACS 651/751 to a flat, vibration-free surface.
2.
Apply the brake to prevent the unit from rolling away.
3.
Connect the power cable to the power inlet of the
ACS 651/751
.
4.
Connect the power cable to the mains supply.
i
The ACS 651/751 is designed for 230 volts,
50/60 hertz. Observe the specifications on the
manufacturer's name plate of the ACS 651/751.
5.
Turn on the master switch.
The self-test is initiated automatically. After the
self test is complete, the following screen is dis-
played.
i
When the unit is powered on for the first time, the
ACS 651/751 starts in English.
6.
Enter the date in
the required format
.
7.
Enter the time. Press
E
.
A list of languages is displayed.
