Bosch AGS10-2, Installation And Servicing Instructions

22

 | 

Commissioning, inspection and maintenance reports

AGS10-2, AGS10E-2, AGS20-2, AGS50-2

6 720 811 270 (2015/04)

5.

Pump functioning checked in the positions (On/Off/Auto)?











Collector groups

1. 

Visual inspection of collectors carried out (safe seating, visual impression)?

2)





3)



3)



3)



3)

2.

Collector temperature sensor correctly positioned and pushed fully into the 
sensor pocket?





3)



3)



3)



3)

3.

Visual inspection of the installation system carried out?





3)



3)



3)



3)

4.

Visual inspection for leaks carried out at points where mounting structure 
meets roofing?





3)



3)



3)



3)

5.

Visual inspection of pipework insulation carried out?





3)



3)



3)



3)

6.

Visual inspection of glass panes. Cleaning if there is severe contamination? 



3)



3)



3)



3)



3)

7.

Backup heating is functioning properly?











Solar cylinder

1.

Maintenance on solar storage cylinder carried out?

2)

– 









Control system

1.

Hours run for solar pump P1: 
Period from _________ to _________ / _____ h

 4)

2)

__ - __
_____ h

__ - __
_____ h

__ - __
_____ h

__ - __
_____ h

__ - __
_____ h

Hours run for solar pump P2: 
Period from _________ to _________ / _____ h 

4)

__ - ___
_____ h

__ - __
_____ h

__ - __
_____ h

__ - __
_____ h

__ - __
_____ h

3.

Activation/deactivation temperature difference of solar pump 

Δ

T pump 1 

checked and entered here?

_ K/_ K

_ K/_ K

_ K/_ K

_ K/_ K

_ K/_ K

Activation/deactivation temperature difference of solar pump 

Δ

T pump 2 

checked and entered here?

_ K/_ K

_ K/_ K

_ K/_ K

_ K/_ K

_ K/_ K

4.

Temperature indicated by all temperature sensors (resistances checked)?











5.

Temperature sensors correctly positioned, insulated and connected?











6.

Maximum cylinder temperature Tmax for solar storage cylinder 1 checked 
and entered here?

____ °C

____ °C

____ °C

___ °C

___ °C

Maximum cylinder temperature Tmax for solar storage cylinder 2 checked 
and entered here?

____ °C

____ °C

____ °C

___ °C

___ °C

7.

Is the required set temperature (backup heating) being maintained by the 
controller?











Heat meter

 (if installed)

1.

Period from __________ to __________ / ______ kWh

2)

__ - __
__ kWh

__ - __
__ kWh

__ - __
__ kWh

__ - __
__ kWh

__ - __
__ kWh

2.

Temperature sensors correctly positioned, insulated and connected?











Notes

The solar system has been installed and put into operation, or inspected and serviced, in 
accordance with all instructions.











The operator has been instructed in the functions and operation of the solar system. 











Company stamp / date / signature

1) pH value = indicator of the acid content of a fluid; indicator strips available from chemists or service cases.

2) See instruction manual for the component.

3) Where required.

4) Not all controllers can display the number of hours run. A system runs for approx. 1200-2500 hours a year (depending on the system data). 

Commissioning, inspection and maintenance tasks

Page

Commission-
ning

Inspection/maintenance

1.

2.

3.

4.

Table 16