English |
13
Bosch Power Tools
F 016 L70 832 | (27.4.12)
Declaration of Conformity
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
12.04.2012
Mounting and Operation
Working Advice
Sawing Function
Although the tooth opening allows wood to be cut up to
Ø 26/34 mm, the tip of the blade is designed to cut wood up
to Ø 32/38 mm.
Troubleshooting
3 600 ...
H47 E..
H47 F..
H47 G..
H47 H..
H47 J..
H47 K..
We declare under our sole responsibility that the product described under “Technical data”
is in conformity with the following standards or standardization documents: EN 60745 ac-
cording to the provisions of the directives 2011/65/EU, 2004/108/EC, 2006/42/EC,
2000/14/EC.
2000/14/EC: Guaranteed sound power level
Conformity assessment procedure according to Annex V.
dB(A)
97
98
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Delivery Scope
1
Connecting the Extension Lead
2
Starting
3
Stopping
3
Working Advice
4
Sawing Function
5
Blade Maintenance
6
Storage and Transport
6
Selecting Accessories
7
Action
Figure
Problem
Possible Cause
Corrective Action
Hedgecutter does not
operate
Power turned off
Turn power on
Mains socket faulty
Use another socket
Inbuilt supply cable damaged
Inspect supply cable carefully, contact Service
Agent for replacement
Separate extension cable damaged
Inspect extension cable, replace if damaged
Fuse faulty/blown
Replace fuse
Hedgecutter operates
intermittently
Inbuilt supply cable damaged
Inspect supply cable carefully, contact Service
Agent for replacement
Separate extension cable damaged
Inspect extension cable, replace if damaged
Internal wiring of garden product damaged Contact Service Agent
On/Off switch defective
Contact Service Agent
Motor runs but blades remain
stationary
Internal fault
Contact Service Agent
OBJ_BUCH-1549-002.book Page 13 Friday, April 27, 2012 8:56 AM