(172,1)
[ Edit: 2019/ 9/ 13
Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
8. Troubleshooting guide
SYSTEM UNIT
LIQUID CRYSTAL DISPLAY
Symptom
Possible cause
Possible solution
The screen is too dark.
The cabin temperature is too low.
Wait until the cabin temperature becomes
moderate.
Screen brightness is set to the maximum
darkness.
Adjust the brightness setting of the screen.
The screen is too bright.
Screen brightness is set to the maximum
brightness.
Adjust the brightness setting of the screen.
A small black spot or a small bright spot
appears on the screen.
This is a typical phenomenon for liquid crystal
displays.
This is not a malfunction.
A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated
from neon billboards, high voltage electric
power cables, ham radios or other radio
devices equipped to other vehicles may
adversely affect the screen.
This is not a malfunction.
Image lag appears on the screen.
This is a typical phenomenon for liquid crystal
displays.
This is not a malfunction.
Image motion displayed on the screen is slow. The cabin temperature is less than 50°F
(10°C).
Wait until the cabin temperature rises to
within 50°F (10°C) and 122°F (50°C).
When looking at the screen from an angle, the
screen lightens or darkens.
This is a typical phenomenon for liquid crystal
displays.
Adjust the brightness setting of the screen.
The screen turns blue or an error message is
displayed on the touch screen display.
A system malfunction has occurred.
It is recommended that you contact a NISSAN
dealer for an inspection.
Condition:
8-2
