English |
23
Bosch Power Tools
F 016 L81 139 | (16.10.14)
Delivery Scope
Carefully remove the power tool from its packaging and check
if the following parts are complete:
– Chain saw
– Cover
– Chain
– Chain bar
– Oil filler cap
– Chain guard
– Adjusting tool (AKE 30/35/40)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Rear handle (insulated gripping surface)
2
On/Off switch
3
Lock-off button for On/Off switch
4
Oil filler cap
5
Activation lever for kickback brake (hand guard)
6
Front handle (insulated gripping surface)
7
Nose sprocket (AKE 35 S/1835 S/40 S/35/40/45 S)
8
Chain guard
9
Saw chain
10
Chain bar
11
Gripping teeth
12
Clamping knob (AKE 30 S/35 S/1835 S/40 S/45 S)
13
Cover
14
Chain tensioning knob (AKE 30 S/35 S/1835 S/
40 S/45 S)
15
Extension cable*
16
Power plug**
17
Serial number
18
Adjusting tool (AKE 30/35/40)
19
Chain catch bolt
20
Drive sprocket
21
Fastening bolt
22
Symbol for rotation and cutting direction
23
Oil outlet
24
Guide fin for chain bar
25
Chain tensioning peg
26
Locking nut (AKE 30/35/40)
27
Chain tensioning screw (AKE 30/35/40)
28
Oil level gauge
29
Ventilation slots
** country specific
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Chain saw
AKE 30
AKE 35
AKE 40
Article number
3 600 H34 0..
3 600 H34 0..
3 600 H34 0..
Rated power input
W
1600
1800
1800
Chain speed (no-load)
m/s
9
9
9
Chain bar length
cm
30
35
40
Chain type
3/8" – 90
3/8" – 90
3/8" – 90
Drive link thickness
mm
1.1 (0.043")
1.1 (0.043")
1.1 (0.043")
Amount of drive links
45
52
57
Oil reservoir capacity
ml
200
200
200
Automatic chain oiler
Nose sprocket
–
Kickback brake
Metal gripping teeth
Weight without mains cable. approx.***
kg
3.9
4.0
4.1
Protection class
/
II
/
II
/
II
***measured with chain bar and chain
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0,25 ohm.
OBJ_BUCH-2245-001.book Page 23 Thursday, October 16, 2014 11:51 AM
