English - 6
20
• F016 L70 348 • TMS • 08.09.05
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove battery before investigating fault.
Fault Finding
Symptom
Possible Cause
Remedy
Can not fit Guard over
cutting disc
Incorrect assembly
Remove cutting disc and fit guard, see
also Product assembly
Machine fails to operate
Battery discharged
Recharge battery, see also Charging
advice
Machine functions
intermittently
Machines internal wiring damaged
On/Off switch defective
Contact Service Agent
Contact Service Agent
Excessive vibration/
noise
Machine fault
Blade broken
Contact Service Agent
Replace blade
Cutting time low on one
battery charge
Battery not used for long period or ini-
tial usage
Grass too high
Battery worn out
Fully charge battery, see also charging
advice
Cut in stages
Replace the battery
Blade will not move
Battery discharged
Machine fault
Recharge battery, see also Charging
advice
Contact Service Agent
Machine is not cutting
Blade broken
Battery not fully charged
Grass entangled around cutting disc
Replace blade
Recharge battery, see also Charging
advice
Remove grass
No charging procedure
possible due to defective
battery
The battery temperature is not within
the allowable temperature range
The contacts of the battery are con-
taminated
The battery is defective, due to a dis-
connection in the battery (individual
cells)
Get the battery temperature within the
allowable temperaturerange (0 °C to
45 °C) either by cooling down or warm-
ing up. As soon as the battery temper-
ature is within the allowable tempera-
ture range again, the battery charger
automatically switches to rapid charg-
ing
Corrective measure: Clean the con-
tacts (e. g. by inserting and removing
the battery several times) or replace
the battery, as required
Replace the battery
The LED indicator
14
does not light up after
plugging the mains plug
into the socket and insert-
ing the battery into the
charging compartment
16
The charger plug is not inserted (prop-
erly)
Socket, cable or charger are defective
Insert the plug (fully) into the socket
Check the mains voltage and if neces-
sary, have the battery charger
checked by an authorized customer
service station for Bosch power tools
F016 L70 348 - GB Seite 6 Donnerstag, 10. November 2005 10:11 10
Summary of Contents for Art Accutrim
Page 2: ...2 F016 L70 348 05 09 360 1 2 3 4 6 10 13 17 5 8 9 11 12 7 14 15 16 ...
Page 3: ...3 F016 L70 348 05 09 C L I C K A B1 B2 B3 10 8 6 11 11 18 18 19 ...
Page 4: ...4 F016 L70 348 05 09 E F C D 5 3 4 6 22 20 20 21 ...
Page 5: ...5 F016 L70 348 05 09 G 90 H J I 12 6 11 18 6 6 5 7 12 6 ...