22
Clean the surface of the
appliance with a soft damp cloth
and a little washing-up liquid.
Afterwards, rub dry.
After cleaning: reconnect and
switch on the appliance
Cleaning the humidity
filter
Cleaning the water
collecting tray
Spilled water collects in the water
collecting tray.
To empty and clean, remove the
filter. Wipe out water collecting tray
with a sponge or absorbent cloth.
Cleaning the ice cube
container
If ice cubes have not been
dispensed for a prolonged period,
they will shrink, have a stale taste
and stick together.
Pull out the container, empty
and clean with lukewarm water.
Thoroughly dry the container
and screw conveyor to prevent
new ice cubes from sticking.
Inserting the ice cube container:
Push the ice cube container all
the way back onto the supports
until it locks into position.
If the container cannot be
pushed all the way back, twist
the screw conveyor in the
container.
Ice cube production continues.
Changing the
bulbs in the
refrigerator and
freezer
compartments
Switch off the appliance with
the power button! Pull out the
mains plug or switch off the
fuse
.
Remove cover.
Change the bulb.
Replacement bulb max. 25 W,
E14 bulb holder.
Re-attach the cover.
m
CAUTION
m
A full-filled ice cube container is
very heavy.
To avoid risk of injury,
use caution when removing the
ice cube container!
m
WARNING
m
Risk of electric shock!
To avoid electrical shock which
can cause death or severe
personal injury, disconnect
power to appliance before
making repairs.
After making repairs, reconnect
power.
