Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, NY 14450
USA
www.boschsecurity.com
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
3 | Turn off (disarm) your system
© 2018 Bosch Security Systems, Inc.
F.01U.297.874 | 05 | 2018.05
Copyright
This document is the intellectual property of Bosch Security
Systems, Inc. and is protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are
likely to be registered trademarks and must be treated accordingly.
El-gr: Μεταβείτε στη διεύθυνση https://gr.boschsecurity.com/el/ για την
τεκμηρίωση σε αυτήν τη γλώσσα.
Es-es: Visite https://es.boschsecurity.com/es/ para obtener documentación en
este idioma.
Fr-fr: Accédez à l’adresse https://fr.boschsecurity.com/fr/ pour obtenir la
documentation dans cette langue.
Hu-hu: A honosított dokumentációt lásd a https://hu.boschsecurity.com/hu/
oldalon.
It-it: Andare a https://it.boschsecurity.com/it/ per la documentazione in questa
lingua.
Pl-pl: Dokumentacja w tym języku znajduje się w witrynie https://
pl.boschsecurity.com/pl/
Pt-br: Acesse http://pt.boschsecurity.com/pt/ para obter a documentação neste
idioma.
8 | Keypad cleaning
Use a soft cloth or a non-abrasive cleaning solution. Spray the cleaner
onto the cloth, not the keypad.
Use [CMD][5][5], then the prompts.
To set All On with a delay, enter your passcode, then [ENTER].
To open the Main menu use [CMD][8].
For All On: Go to [1] On/Off > [1] All On > [1] All On Delay.
For All On, Instant: Go to [1] On/Off > [1] All On > [2] All On Instant.
For Part On: Go to [1] On/Off > [2] Part On > [1] Part On Delay
For Part On, Instant: Go to [1] On/Off > [2] Part On > [2] Part On Instant.
1. Open the Main menu.
2. Touch [CMD][8].
3. Go to [6] Shortcuts.
4. To choose the shortcut, touch [NEXT] and [ENTER].
When the security system is in alarm, the number of alarms shows on
the display.
Enter your passcode to stop the alarms. If the system is armed, stopping
silencing the alarm also stops the system.
The system shows Alarm Silenced, and the number and names of points
in alarm, in the order they occurred.
or
or
Use one of the commands:
For All On: [CMD][1]
For All On, Instant: [CMD][1][1]
For Part On, Instant: [CMD][2]
For Part On: [CMD][3]
Do one of the following:
Enter your passcode.
or
Use the menus:
•
Press [CMD][8] to open the Main menu.
•
For Turn Off: Go to [1] On/Off > [3] Off > [1] Off.
•
For Turn Off Select: Go to [1] On/Off > [3] Off > [2] Off Select. Use
[NEXT] and [ENTER] to select the area to turn off.
Press [CMD][8], Go to [4] Users > [1] Change Passcode, and then
follow the prompts.
or
or
Use [CMD][8].
Go to [4] Users > [2] Add User.
6 | Alarms
4 | Change your passcode
5 | Edit users
5.2 | Edit Users
5.3 | Delete users
The menu options allow you to choose individual areas to turn on. Open
the All On or Part On menu, press [3] to open the Select menu, and
then use [NEXT] and [ENTER] to choose On Instant or On Delay and the
area to turn on.
7 | Shortcuts
5 .1 | Add users
You can change passcodes, and add, remove, and replace keyfobs and
cards (if supported by your security system).
Use [CMD][8].
Go to [4] Users > [3] Edit User.
or
Use [CMD][8] to open the Main menu.
Go to [4] Users > [4] Delete User.
Use the command:
[CMD][5][6]
Use the command:[CMD][5][3]
2 | Turn on (arm) your system
en
User’s Quick Reference Guide
Basic Keypad
B915/B915I
