30
31
No Schedule
From the Main Screen, use the up or down arrows to change
the temperature setpoint, and then press Ok to confirm your
selection. You will see a green check mark confirming your
selection.
Schedule
Follow the same process as above to change the setpoint, but
be aware that you are only changing the setpoint until the next
scheduled period listed on the thermostat. If you would like to
change the setpoints for the schedule periods, please see the
section Schedule further on in this Manual. Note: The hold
feature is not available from the thermostat, only from the app.
Note: when the thermostat is in Auto mode, you must first
select either your heating or cooling setpoint depending on
which setpoint you would like to modify.
Adjusting Temperature Setpoint(s)
System
Use the up and down arrows to change the system mode of
your thermostat between: Heat, Cool, Auto, Emergency Heat
(available for Heat Pumps and Dual Fuel systems only) or Off.
Note: from the menu, the red or blue bubble next to the system
icon indicates the current system status: on or off, where red
signifies heating is on and blue signifies cooling is on.
Menu Overview
Fan
Use the up and down arrows to change the fan mode of your
thermostat between:
u
Auto:
the fan will automatically turn on when there is a call
for heating or cooling (recommended)
u
On
: the fan will always be on
u
Circulation:
the fan will turn on and off based on a user
programmed schedule.
Note: Fan schedule can only be programmed from the app.
