25
en
Service programs
■
Push the brewing unit all the way into the
appliance and press on the middle until it
audibly clicks into place.
NOTICE:
The red latch must be right over at the left
at
j
before replacing (see figure
E
).
■
Press the eject lever up and push the red
latch over to the right to
k
.
■
Insert the coffee grounds container.
■
Replace the protective cover.
■
Close the appliance door.
Service programs
(see also the Quick reference guide)
The following messages will appear on the
display at certain intervals, either
“Cleaning program urgently required!”
or
“Descaling program urgently required!”
or
“Calc’nClean program urgently required!”
.
The unit should immediately be cleaned or
descaled using the appropriate program.
Alternatively, the two processes Descale
and Clean can be carried out together using
the Calc‘nClean function (see the section
“Calc‘nClean”). Failure to carry out the
service program according to the instruc-
tions may damage the appliance.
Note:
If the appliance is not descaled when it is
supposed to be, the message
“Descaling
program is overdue. Device will shortly be
locked.”
will appear. Immediately perform
the descaling process in accordance with
the instructions. If the appliance is locked, it
can only be operated again once the desca-
ling process has been carried out.
To display how many beverages can still
be prepared before one of the service pro-
grams needs to be run, proceed as follows:
■
Press
E
.
The service programs appear. The counter,
e.g.
“Descaling program necessary in
28 cups”
provides information on when to
perform the respective program next.
NOTICE:
For each of the service programs, use des-
caling and cleaning agents as described in
the instructions and observe the (relevant)
safety information.
Never interrupt a service program.
Never use vinegar, citric acid or any vine-
gar-based or citric acid-based agents.
Never place descaling tablets or other des-
caling materials in the coffee drawer!
Specially developed, suitable descaling
and cleaning tablets are available from
retail outlets or from customer services
(see the section “Accessories”).
¡
CAUTION
Do not drink or come into contact with
cleaning or descaling materials.
Keep cleaning materials and descaling
tablets out of the reach of children. They
may be toxic.
NOTICE:
Before starting each service program
(Descale, Clean or Calc’nClean) remove
the brewing unit, clean as instructed and
replace it. Be careful not to jam the milk
tube when closing the door.
After completion of each service program,
wipe the appliance immediately with a soft,
damp cloth to remove any residues from
the descaling and cleaning solution. It is
possible for corrosion to form underneath
such deposits.
New sponge cloths may contain salts. Salts
can cause rust film on stainless steel and
must therefore be washed out thoroughly
before use.
Clean the beverage outlet, milk tubes and
connecting piece thoroughly.
