Issue/Amendment
Page
Bosch BPT-S String Inverters
1.4
4/4
From
Quick Installation Manual
Our Reference
Date
BPTE/SA
M1-AO
Matthew
Argyropoulos
Dec 4th, 2015
-
Grid parameter
is last. AS 4777.2/3 should be shown
already. If another grid code is present
wave
your
hand in front of the inverter screen until AS 4777.2/3
is shown.
-
Hold
your hand in front of the inverter until the
progress bar on the screen is full to lock grid code
setting.
To setup the time and date see section
5
5
Time and date setup with Laptop/ Tablet/ Smartphone
To connect to inverter via Laptop/ Tablet/ Smartphone use an Ethernet cable (Cat5)
or e.Connect.
Connect the inverter to your Laptop with Ethernet
cable using the Ethernet port at the bottom of the
inverter.
For Smartphone/ Tablet WiFi connection use
e.Connect
.
Plug e.Connect to inverter using supplied
cable.
Turn e.Connect on and wait until the 3 lights are green (see picture) .
Connect with your device to the
Bosch PowerTec e.Connect
WiFi network
(password
boschaus
).
On your device open a web browser (Mozilla Firefox is preferred) and enter the
inverter IP address on the address line. You can find the IP address by waving your
hand in front of the screen (usual IP format is 192.168.xxx.xxx). Hit
enter
or
Go
.
On the first page the Country, Language and Grid code settings are shown. As these
have already been setup via e.Key or Gestures hit the
Next
button to move to the
next page.
Enter the time - date information and hit
next
and/or
save
until you get to the e.Data
homepage.
