20 | BSA 7xxx / 8xxx | Symbols used
1 691 806 123
2017-06-23
|
Beissbarth GmbH
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word
Probability of
occurrence
Severity of danger if
instructions not observed
DANGER
Immediate
impending
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible
intermediate result.
"
Final result
There is a visible final result on
completion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
2. User instructions
2.1
Important information
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Beissbarth Test Equipment". These instructions must
be carefully studied prior to commissioning, connection
and operation of the BSA 7xxx / 8xxx and always be
observed.
2.2
Safety Instructions
All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Beissbarth Test Equipment"
(user information, order number 1 691 696 900).
These instructions must be carefully studied prior
to commissioning, connection and operation of the
BSA 7xxx / 8xxx and always be observed.
2.3
Related documents
Important information and safety instructions can be
found in the user information document (1 691 696
920).
A list of additional documents can be
found in the original operating instructions
1 691 806 101 (de) / 1 691 806 103 (international) for
test benches with a PC display in the section "Related
documents".
2.4
Electromagnetic compatibility (EMC)
The BSA 7xxx / 8xxx satisfies the requirements of the
EMC directive 2004/108/EG.
The BSA 7xxx / 8xxx is a class B product as per
EN 61 326.
en
