Carephone 61
Programming | en
19
Bosch Security Systems
User Manual
F.01U.239.30x | V1 | 2011.06
23 Waiting time for repeated emergency call
An emergency call is repeated to check the arrival of staff until it is
acknowledged by pressing the Action button on the Carephone 61, or the
repeated call is disabled by the monitoring centre. The emergency call is
repeated when the defined waiting time is exceeded.
–
Enter a time between
0
and
99
minutes.
0
= off.
24 Confirmation with call
When the repeated emergency call has been locally acknowledged, you can
speak directly to the monitoring centre.
–
0
= off (no call is made),
1
= a call is made to the monitoring centre.
If this function is selected, the person rendering assistance can speak to
the monitoring centre immediately.
25 Radio transmission monitoring
The Carephone 61 can monitor the wireless transmitters that are assigned.
The wireless transmitters send a signal to the Carephone 61 at regular
intervals. A failure message is sent to the monitoring centre if the
Carephone 61 does not receive this signal at least once a week.
–
0
= off,
1
= on.
26 Call back waiting time
The call back function enables the help provider or monitoring centre to
terminate an alarm after having acknowledged it. The Carephone must be
called back, or the Action button must be pressed, after an alarm has been
acknowledged. Define the waiting time after the acknowledgement, during
which a call back will be accepted. If this call back waiting time has
elapsed, then a new call will be sent by the Carephone.
–
Enter a time between
0
and
9
minutes.
0
= off.