Configuration
To configure the CCS 1000 D Digital Discussion System you can use:
–
the touch buttons on the front of the control unit, or
–
the web browser interface. For more information, see Web browser interface, page 38.
The control unit can be used to quickly view and change basic settings. The advantages of
using the web browser interface to configure the system are:
–
additional options and settings are available.
–
settings can be easily managed remotely.
Notice!
Changes made on the control unit are automatically updated in the web browser interface
and vice‑versa.
Control Unit
1.
After connecting power, the Control Unit automatically powers up. The power on/off LED
turns green, and the other LEDs on the front panel are alternatively lit to indicate that the
system is initializing. The system is ready for use when the LEDs are constantly lit.
2.
Press the touch buttons on the front panel to set basic system settings. The LED
indicators will change to indicate the setting. Refer to the following figure and table for
more information on the settings:
4
1
2
3
5
6
9
11
7
8
10
12
13
14
P
T
T
Figure 7.1: CCSD‑CURD front view
The CCSD‑CURD has additional features as indicated in the following table:
Number Item
Description
1
Power on/off button
On/off push button for 24 VDC:
Power on: Short press.
Power off: Long press.
Note: When the system is powered off, the ‘waiting list’ and ‘speakers
list’ are automatically saved and will be available again when the system
is powered on.
2
Power on/off LED
LED indicator for showing the on/off status.
–
Red: Power off.
–
Green: Power on or standby.
Note: When the Control Unit is in standby, the Discussion Devices
volume control LED (3) flashes slowly.
7
7.1
30
en | Configuration
Digital Discussion System
2016.05 | V2.0 |
Operation manual
Bosch Security Systems B.V.
Summary of Contents for CCS 1000 D
Page 1: ...Digital Discussion System CCS 1000 D en Operation manual ...
Page 2: ......
Page 69: ......