A D00 A49 029
|
2017-06-09
Robert Bosch Engineering and Business Solutions Private Limited
•
Be sure that the service technician uses replacement
parts specified by the manufacturer, or that which
have the same characteristics as the original parts.
Unauthorized substitutions may cause injuries or
other hazards.
i
The IMPORTANT SAFEGUARDS and WARNINGS
presented in this manual do not cover all possible
conditions that may occur. Common sense, caution
and care must be exercised when installing,
maintaining or operating the unit.
1.5
Important Notices
Accessories
- Do not place this unit on an
unstable stand, tripod, bracket, or mount.
The unit may fall, causing serious injury
and/or serious damage to the unit. Use
only with mounting solutions specified
by the manufacturer. When a cart is used,
use caution and care when moving the
cart/unit combination to avoid injury from
tip-over. Quick stops, excessive force, or
uneven surfaces may cause the cart/unit
combination to overturn. Mount the unit as
per the installation instructions. .
1.5.1
Don'ts
•
Do not connect the unit to the electrical power supply
using cables that have been damaged.
•
Do not remove any of the connectors.
•
Do not keep the unit below water body and water
pipes.
•
Do not keep the unit in temperature range other than
indicated in recommendation section.
•
Do not power the unit with other power sources than
the original provided by RBEI. Voltage and current
maximum ratings can be exceeded, stopping unit from
working and voiding warranty.
•
Do not try to extract, screw, break or move connectors
far from necessary usage, waterproof sealing can be
damaged and warranty will be voided.
•
Do not connect any sensor not provided by RBEI.
•
Do not place nodes on places or equipment where
it could be exposed to shocks and/or big vibrations.
•
Do not keep mating connectors or dust caps in unlock
condition.
•
Do not use dropped unit.
•
Do not replace the sensor or any parts in the mounting
condition.
•
Do not carry the unit in assembled condition (with sun
shade, splash guard, hose clamp and screw hardware).
•
Do not mishandle CO
2
and UV sensor as it may cause
reading disturbance due to vibration or shock.
1.5.2
Environmental statement
Bosch has a strong commitmenttowards the environment.
This unit has been designed to respect the environment
as much as possible.
1.5.3
Moving
Disconnect the power before moving the unit. Move the
unit with care. Excessive force or shock may damage the
unit.
1.5.4
Unpacking
•
This equipment should be unpacked and handled
with care. If an item appears to have been damaged in
shipment, repack it in the original packaging and notify
the shipping agent or supplier immediately.
•
Verify that all the parts listed in the parts list below
are included. If any items are missing, notify your RBEI
representative.
•
The original packing carton is the safest container to
transport the unit and must be used if returning the
unit for service. Save it if possible, for future use.
1.5.5
3/CP300H (3.6V NI-MH BATTERY) & CR2032H
BATTERY:
Caution:
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used batteries (3/CP300H & CR2032H
battery) according to the instructions.
Refer section 8.1
en
4 | Symbols and safety precautions
