A D00 A49 029
|
2017-06-09
Robert Bosch Engineering and Business Solutions Private Limited
|
1.6
Enclosure safe handling instructions
Alert type
D
o
'
s
Don'ts
No load on hinges
Do’s:
Always provide support at the bottom side for enclosure cover, in cover open
condition to avoid load on hinges.
Don’ts:
Do not keep enclosure cover without proper support. Do not keep any load
on enclosure cover from inside.
Cotton gloves for product handling
Do’s:
Always use clean hand gloves to handle the enclosure.
Don’ts:
Do not touch the enclosure with bare hands and dirty gloves.
Stacking of enclosures
Do’s:
Use spacer material (preferably foam) to stack empty enclosure.
Don’ts:
Do not stack empty enclosure without any spacer material in-between.
Stacking of assembled enclosures are not recommended.
Enclosure movement
Do’s:
Hold horizontally and ensure support from all the sides during hand carry of
enclosures. 4 hands support for larger size (control series) is a must.
Don’ts:
Do not hold enclosure in vertical position and hand carry.
Load on vent kits
Do’s:
Enclosure covers are to be placed at 180
°
with bottom support.
Don’ts:
Do not rest enclosure cover on vent kits. Do not rest enclosure itself on vent kit.
1.7
Short information
All efforts have been made to ensure the accuracy of material provided in this document at the time of release. However,
the items described in this document are subject to continuous development and improvement. All specifications
are subjected to change without notice and do not represent a commitment on the part of Robert Bosch Engineering
and Business Solutions Private Limited (RBEI). RBEI will not be responsible for any loss or damages incurred related
to the use of information contained in this document.
!
Before starting up, connecting and operating this product, it is absolutely essential that the installation instructions
and, in particular, the safety instructions are studied carefully. By doing so, any uncertainties in handling this
product can be eradicated and will ultimately help to avoid damage to the unit.
Copyright
This manual is the intellectual property of RBEI and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must
be treated accordingly.
Symbols and safety precautions | 5 en
