Cleaning and servicing
en
25
Display
Basic setting
Selection
Description
Button tone
= off
= on
1
Switch the button tones on
or off.
Display brightness
= low
= medium
1
= high
Set the brightness of the
display.
Time indicator
= off
= on
1
Show the clock time in the
display.
Interior lighting
= off
= on
1
Switch the interior lighting
on or off.
Water hardness
= softened
= soft
= moderate
= hard
= very hard
1
.
Factory setting
= off
1
= on
Reset the changed settings
to the factory settings.
Demo mode
= off
1
= on
Switch demo mode on or
off.
Note:
Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
1
Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement:
The appliance is switched off.
1.
Press and hold for a few seconds.
a
The first basic setting is shown on the display.
2.
Use the rotary selector to change the basic setting.
3.
Press .
a
The next basic setting is shown on the display.
4.
Use to select all of the required basic settings
and change the values.
5.
To save the changes, press and hold for a few
seconds.
Note:
The changes to the basic settings will be re-
tained even after a power cut.
15.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.
16 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
16.1 Tips on caring for your appliance
Follow the tips on appliance care to make sure your
appliance functions properly at all times.
Measure
Advantage
Always keep the appli-
ance clean and remove
dirt immediately. Always
clean the cooking com-
partment after use.
Prevents dirt from accu-
mulating and burning on.
Remove limescale,
grease, starch and albu-
min (e.g. egg white)
stains immediately.
Prevents corrosion.
Measure
Advantage
Use the glass tray for
baking very moist cakes.
Keeps the cooking com-
partment cleaner.
Use suitable cookware for
roasting, e.g. a roasting
dish.
Keeps the cooking com-
partment cleaner.
16.2 Cleaning products
Only use suitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.