![background image](http://html.mh-extra.com/html/bosch/conettix-d6100i/conettix-d6100i_manual_43543137.webp)
Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | Appendix C: Modem4/Modem
IIIa
.
Bosch Security Systems, Inc. | 2012.09 | 4998122703-05
137
ZONEX and Comex Translation
These items supply additional information related to
Appendix C: Modem4/ModemIIIa
2
Messages.
Some
of these numbered items are also referenced in the Comments section of
Appendix C.
1. When Point User Flag is programmed to Yes in panel programming of panels that support this
function, the zone and point information will be translated. The D6600/D6100 converts point data to
ZONEX format and user IDs to Comex format.
Table 99
shows the translation of point data
and
Table
100
shows the translation of User IDs. If Point User Flag is programmed to a No in the panel, then
the zone and point information are sent as received.
Table 99: Point to ZONEX Translation
Point
ZONEX
001-008
100-800
009-024
101-116
025-040
201-216
041-056
301-316
057-072
401-416
073-088
501-516
089-104
601-616
105-120
701-716
121-136
801-816
137-152
117-132
153-168
217-232
169-184
317-332
185-200
417-432
201-216
517-532
217-232
617-632
233-247
717-731