background image

Graphic Keypads

Installer Reference Guide

10

Bosch Security Systems    03/16    Graphic Keypads BIRG  FTR1.0

Service Keypad Installer Tool

The CP799B Service Keypad has been designed to assist the installer or service technician when working on selected 
Solution control panels.
The keypad can be temporarily plugged onto any module on the 
system that has a service port header via it’s built in 1.5m lead.

Once connected it allows the installer to easily log into program-
ming mode, interrogate zone or output status, review the history 
log and perform other functions as if they were using the main 
keypad.

This is particularly useful in large installations where a number 
modules are dispersed around the building or in separate build-
ings and the main system keypads are located some distance 
away.

Addressing

Unlike other keypads, the service keypad does not need to be 
addressed which means there is no need to scan the LAN for the 
system to recognise it.  Built in security means that the system will only respond to the service keypad if the panel 
has been placed in service mode from one of the main keypads or if the panel cabinet tamper input is unsealed.  
Service keypad operation will cease when service mode ends or the cabinet tamper is sealed.

The CP799B keypad includes a built in DF smart card reader allowing RFID cards and tokens to be easily enrolled di-
rectly at the keypad if required.  Alpha text characters have also been included on the keypad buttons which will can 
help to speed up text entry at the keypad.

i

Note

  You should always exit programming mode via the 

service keypad before disconnecting it from the sys-
tem.  Failure to do this may prevent the system from 
arming because programming mode is still active.

Features

Plug On Connection To Modules With Service Ports

Allows Programming At The Panel During Install

No Need To Assign A Keypad Address

Flexible 2 Metre Connection Lead 

Alpha Characters On Keys To Aid Text Programming

Leads Can Be Easily Replaced When Needed

Operates When System In Service Mode

Built In Smart Card Reader Simplifies Enrolment

Operates When Cabinet Tamper Is Unsealed

3 Year Factory Warranty (Return To Base)

CP799B Compatibility

Panel

Supported

Solution 6000

2.16

Table 10: CP799B Compatibility

CP799B

Service Keypad Installer Tool

Summary of Contents for CP799B













Reviews: