From
Our Reference
Tel
XC-DA/ECR3-Bp
Daniel Radics
+36 1 879-6276
Issue
1.0
Topic
CR5CBCC User Manual
Budapest
10 June 2021
Page 6 of 17
Report
CR5CBCC_User_manual.docx
rear of vehicle, at higher speeds, the CR5CBCC operates in long-range mode, monitoring area
behind vehicle for small, fast approaching targets (like motorbikes).
4.2
Areas of application
The CR5CBCC is the base for range of safety and driver assistance functions. In particular, the
CR5CBCC can be used for the following functions:
4.2.1
Blind spot detection
Optical and/or acoustic warning of the driver if a vehicle is detected in the Blind Spot Zone in
order to avoid unsafe lane change or turn maneuvers of the driver.
4.2.2
Lane change assist
Optical and/or acoustic warning of the driver if an approaching vehicle is detected in the
neighboring lanes in the area behind the Blind Spot Zone in order to avoid unsafe lane change
or turn maneuvers of the driver.
4.2.3
Rear Cross Traffic Assist with braking
Optical and/or acoustic warning of the driver on vehicles crossing the estimated path of the ego
vehicle in the rear area (e.g. backing out of parking spaces).
4.2.4
Door opening warning
The door opening warning (DOW) feature shall detect target vehicle in the door opening
warning zones. DOW feature warns the driver and passengers against collisions that may occur
with target vehicle passing the subject vehicle from behind within a specific lateral distance from
subject vehicle's relevant side when subject vehicle is at standstill and the door is to be opened.
It supports the driver and passengers of the subject vehicle when leaving the vehicle.
4.2.5
Rear collision warning
Warning to the target vehicle if it is approaching the subject vehicle from behind and there is a
chance of collision.
4.2.6
Front Cross Traffic Assist - Information
Optical visualization of the time based criticality of the approaching vehicle, crossing in front of
the vehicle. The front cross traffic assist-Information function is designed to inform the driver at
stand-still or during drive-off / acceleration phase at intersection scenarios or while leaving a
parking spot.
