Fire System
|
User’s Guide
| 4.0
System Events
Bosch Security Systems, Inc. | 8/06 | F01U011793B
14
When this tone sounds, evacuate all
occupants and investigate for smoke or fire.
The keypad display shows only the point text of the first
point that entered fire alarm. Press [NEXT] or [PREV] to
acknowledge this alarm or any other alarm condition or other
condition that is not normal. The first pressing of the [NEXT]
key performs an acknowledge function. Refer to
Section 3.0
Keypad Navigation
Keys on page 12.
Subsequent pressing of the [NEXT] key after the
acknowledge function shows any additional points that
entered alarm. Use the [NEXT] and [PREV] keys to show
events from the oldest to the newest and the highest to the
lowest priority.
4.3 Fire
Troubles
After an alarm silences, the device that caused the alarm is
usually still faulted or activated. Press [DETECTOR RESET]
to reset a smoke detector. Refer to
Section 11.1.2
DETECTOR
RESET ?
on page 25. A device in a state that is not normal
creates a fire trouble condition.
Examples of trouble conditions include such things as a
broken wire. When a fire trouble occurs, your keypad
repeatedly emits a series of three warble tones followed by a
pause.
The system shows the number of fire points with troubles
(
A1 ## FIRE TRBLE
) in an area and then shows the
custom text for the highest priority trouble condition. Use the
[NEXT] and [PREV] keys to view the other trouble
conditions.
