Part II: System Commands
PERIMETR DELAY ? (C 3)
D1260 Owner’s Manual
© 2003 Bosch Security Systems
50410C
PERIMETR DELAY ? (C 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only arm the perimeter and exit through a door programmed for exit
delay. The interior of the building remains disarmed. People or pets are free to move throughout the interior of the
premises.
This function is also useful in commercial systems when you are working before or after business hours and wish to have
the perimeter armed. Other system users can enter through doors programmed for entry delay, which will start the entry
delay sounder and countdown.
Using Perimeter Delay
1.
Interior points are not armed with this command and may remain faulted while arming with
COMMAND 3.
2.
Press the
COMMAND
key.
The display shows
*System Command*
.
3.
Press the
3
key.
Note:
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the Command Menu,
then press NEXT> soft key repeatedly.
until you reach the PERIMETR DELAY ?> prompt, then press the
adjacent soft key.
4.
The display shows
Exit now! #
(
# = exit delay time
remaining).
After the exit delay expires,
Perimeter On Delayed
is
displayed.
5.
To disarm your security system, enter your personal
passcode and press
ENTER
.
The display then returns to idle text.
Summary of Contents for D1260 Series
Page 2: ...D1260 Owner s Manual 50410C 2003 Bosch Security Systems ...
Page 4: ...Contents D1260 Owner s Manual 50410C 2003 Bosch Security Systems ...
Page 144: ...Appendix Passcode Worksheet D1260 Owner s Manual 50410C 2003 Bosch Security Systems Notes ...
Page 154: ...D1260 Owner s Manual 50410C 2003 Bosch Security Systems Notes ...
