Part III: Advanced Commands
DEL USER ? (C 5 + 3)
D1260 Owner’s Manual
© 2003 Bosch Security Systems
50410C
DEL USER ? (C 5 + 3)
This function allows a user to be deleted.
Note:
This function will delete the passcode, Master User, and all sub-users associated with the user number.
1.
Ensure your command center shows idle disarmed
text.
2.
Press the
COMMAND
key.
3.
The display shows
*System Command*
.
4.
Press the
5
key and then the
3
key.
Note:
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the Menu> soft key to enter the Command Menu,
then press Next> soft key repeatedly
until you reach the DEL USER ?
>
prompt then press the adjacent
soft key.
5.
The display changes to show
Enter user # to be deleted:
Enter the user number, not the passcode. (123 is as an
example.)
Press either the
Enter>
soft key or the
ENTER
button.
6.
If the user number entered is a valid user in the
system, the display will show
Delete User 123? Are you
sure?
(123 is as an example.)
If the user number entered is not a valid user in the
system, the display will show
This user is currently not
in use
.
Summary of Contents for D1260 Series
Page 2: ...D1260 Owner s Manual 50410C 2003 Bosch Security Systems ...
Page 4: ...Contents D1260 Owner s Manual 50410C 2003 Bosch Security Systems ...
Page 144: ...Appendix Passcode Worksheet D1260 Owner s Manual 50410C 2003 Bosch Security Systems Notes ...
Page 154: ...D1260 Owner s Manual 50410C 2003 Bosch Security Systems Notes ...
