Routers
The following minimal requirements apply to routers:
–
1 Gbit or higher Ethernet ports.
–
Supports PIM‑DM or Bidirectional PIM.
–
Performs IP routing in hardware (i.e. a ‘layer 3 switch’) to minimize the routing delay.
–
Packet forwarding rate > 1,000,000 packets per second per port (e.g. 8 Mpps for an
8‑port router).
–
Non-blocking backplane per switching port, i.e. 2 Gbit per port (e.g. 16 Gbps for an
8‑port router).
–
MAC address table of at least 1000 addresses per directly connected subnet.
The following table contains routers or router families (all of which are actually ‘layer 3
switches’) that are recommended to be used in OMNEO systems:
Layer 3 switches (or switch series)
Remarks
Cisco 3560‑X series
Requires IP services feature set
HP 3500 yl series
Requires Premium License
HP 3800 series
-
HP 4800 series
-
HP 5500‑EI series
-
Netgear GSM7328S‑200
-
Netgear GSM7352S‑200
-
DCN multimedia
System installation design and planning | en
11
Bosch Security Systems B.V.
Hardware Installation Manual
2013-08 | V1.0 |
Summary of Contents for DCN multimedia
Page 1: ...DCN multimedia Conference System en Hardware Installation Manual ...
Page 2: ......
Page 31: ......
