Recording and Telemetry | 17
Bosch Motorsport
DDU 10
125 / 188
17.2.2 Logger settings
To display the global DDU 10 settings, open the ‘Logger’ window and click on the ‘Set-
tings’ tab at the bottom.
a) Choose setting for outing counter mode:
• For testbench (without lap trigger) select ‘Testbench’.
• For racetrack (with lap trigger) select ‘Racetrack’.
b) Choose wether the logging partition shall be named Engine recording or Chassis recording.
c) Advanced setting: Select your logging configuration file, if provided by your Bosch Support
Engineer.
d) Choose or create the condition to start recording
e) Enter a password hint and a password (optional).
f) Setting for automatic fragmentation. Do not change!
a)
b)
c)
d)
e)
f)
17.2.3 Recording statistics
The tab ‘Statistics’ shows the channels’ allocation and their current data rate related to the
transmission frequency of the DDU 10 and the whole transmission system.
The overview helps to detect bandwidth bottlenecks of channels. Bandwidth bottlenecks
can be solved by changing the logging rate setting for each channel.
The data rate of the whole system is often less than the data rate of the DDU 10 and limits
the overall transmission speed.
17.2.4 Recording diagnosis
The channel ‘statectrl_ok’ of the DDU 10 can be used for online monitoring of recording
status.
Bit
Value
Name
0
1
RECORD
