Analog and Frequency Inputs
Features
Analog inputs
▪ 0 to 5 V
▪ 12 bit A/D converter
▪ Switchable 3.01 kOhm pull‐up resistor
▪ 8 kHz acquisition rate, up to 1 kHz recording rate
▪ Linear phase digital filter
Frequency inputs
▪ 5 V Hall‐effect type, 2.5 V trigger level
▪ 20 kHz max. frequency
▪ 10 ms measurement window
Analog inputs
Measurements channels
For each analog channel, several ‘subchannels’ are available.
Measurement labels with the characters ‘raw’ show the exact values in mV.
Measurement labels with the characters ‘_fi’ show filtered values.
The word ‘name’ in the table is a placeholder for the channel’s name.
Measurement label
Function
raw_name
mV value of sensor
raw_name_fi
Filtered mV value of sensor
name
Physical value of sensor
name_fi
Filtered physical value
Filtered channels are routed through digital low pass filters:
▪ DDU 8 uses A/D converter oversampling and digital filtering to recording
rate
▪ Digital filters eliminate ‘out‐of‐band’ noise
▪ Cut‐off frequency automatically adjusted to recording rate
10
10.1
10.2
10.2.1
Analog and Frequency Inputs | 10
Bosch Motorsport
DDU S2 PLUS Manual
79 / 136