Physical limits
of channel
Enter physical limits
of the sensor
Choose data type
of the measurement
variable
Enable additional
online calibration
Enter name to auto-
matically create a
new measurement
sheet
Notice
Working with automatically created measurement sheet is ex‐
plained in chapter ‘
Setting up an online measurement [
}
100]
’.
7. Click ‘Finish’ when done.
8. Enter channel name and description.
9. Click ‘OK’ when done.
The channel is inserted into the DDU 8 Project Tree.
Channel is linked
to ANA06
Input pull-up resistor
is deactivated
Characteristic
curve for sensor
Adjustment
is enabled
Available measurements for channel:
Measurement label
Function
raw_name
mV value of sensor
raw_name_fi
filtered mV value of sensor
name
physical value of sensor
name_fi
filtered physical value
Online definition of the curve is covered in the chapter ‘
Online calibration of
measurement channels [
}
106]
’ of this manual.
Analog and Frequency Inputs | 10
Bosch Motorsport
DDU S2 PLUS Manual
89 / 136