▪ Characteristic curve calculation on input channel
▪ Computed vehicle speed
▪ Lap trigger (covered in a special section)
Example: Sensitivity/offset calculation on input channel
1. Click ‘Measurement Sources’ in the Toolbox.
2. Drag the ‘Sensitivity/Offset’ computed source from the Toolbox and drop it
on ‘Computed Channels’ in the DDU 8 Project Tree.
Drag + Drop
A ‘Computed Sensitivity/Offset Wizard’ opens.
Choose input channel
Choose unit group and
unit of output
Enter sensivity and offset
of conversion formula
3. Click ‘Next’ when done.
The second part of the ‘Computed Sensitivity/Offset Wizard’ opens.
Analog and Frequency Inputs | 10
Bosch Motorsport
DDU S2 PLUS Manual
93 / 136