background image

en 

Disposal

10

9.1 Malfunctions

Fault

Cause and troubleshooting

The appliance is not
working.

The mains plug of the power cord is not plugged in.

Connect the appliance to the power supply.

The circuit breaker is faulty.

Check the circuit breaker in the fuse box.

There has been a power cut.

Check whether the lighting in your kitchen or other appliances are working.

The LED lighting
does not work.

Different causes are possible.

Call the after-sales service. 
→ 

"Customer Service", Page 10

Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.

10  Disposal

Find out here how to dispose of old appliances cor-
rectly.

10.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

1.

Unplug the appliance from the mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.

This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.

11  Customer Service

If you have any queries on use, are unable to rectify
faults on the appliance yourself or if your appliance
needs to be repaired, contact Customer Service.
Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.

Note: 

Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.

The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.

11.1 Product number (E-Nr.) and
production number (FD)

You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:

¡

Inside the appliance (remove grease filters for ac-
cess).

¡

On top of the appliance.

Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.

12  Installation instructions

Observe this information when installing the appliance.

Summary of Contents for DHL555BAU

















Reviews: