Divar XF
Advanced configuration menu | en
55
Bosch Security Systems
Installation manual
F.01U.135.429 | 2.5 | 2009.08
6.1.2
Time/date
Figure 6.2
International menu - Time/date
–
Select a
Time zone
from the list (daylight saving time is adjusted accordingly).
–
Select either a 12-hour or a 24-hour clock
Time format
.
–
Fill in the actual
Time
.
–
Select a
Date format
which shows either the month (MM), the day (DD), or the year
(YYYY) first.
–
Enter the actual
Date
.
–
Set
Daylight Saving
to Automatic to enable it. Set to Manual and fill in the day, month,
and time of both
Start
and
End
time
, and the
Offset
if it differs from the information
associated with your time zone.
If the actual time/date is put back by more than 10 minutes, all video content on the hard
drive is deleted (a prompt is given). If put back less than 10 minutes, the clock is frozen
for that allotted time. This prevents video data from being overwritten due to overlapping
time stamps. If the actual time/date is put forward, the clock moves forward to the given
value without further consequence.
6.1.3
Time Server
–
The
Use time server
function synchronizes the time of the unit with the time of a network
time server or another Divar XF unit. Fill in the IP address of the network time server. If a
time server is not present on the same subnet, the Divar XF searches for a suitable time
server outside its own network. Make sure the Divar XF gateway is set correctly to find
the time server. Ensure that firewalls do not block NTP traffic via port 123.
–
Click
Synchronize
to start time synchronization.
Summary of Contents for DHR-1600A-150A
Page 1: ...Divar XF Digital Hybrid Recorder en Installation manual ...
Page 2: ......
Page 87: ......
