background image

en

    Trouble shooting

8

Fitting the metal grease filter

1.

Place the metal filter mat in the filter grille.

2.

Clamp the metal filter mat in place with the wires.

3.

Insert the filter grille.

Note: 

Make sure that the locks on the left and right 

of the filter grille engage.

Changing the activated charcoal filter (only 

in circulating-air mode)

In order to guarantee efficient odour filtration, the filter 

must be serviced regularly.
The activated charcoal filters must be replaced at least 

every 4 months.

Notes

The activated charcoal filters are not included in the 

delivery. The activated charcoal filters can be 

obtained from specialist retailers, from our after-

sales service or from the Online Shop.

The activated charcoal filters cannot be cleaned or 

reactivated.

Note: 

Only use genuine replacement filters. This 

ensures optimal performance of the appliance.

1.

Remove the fleece grease filter; see the section 

entitled 

Removing the metal grease filter

.

2.

Undo the threaded joints on the activated charcoal 

filter covers.

3.

Remove the activated charcoal filter.

4.

Insert the new activated charcoal filter.

5.

Screw the covers into place.

6.

Install the metal grease filter; see the section entitled 

Installing the metal grease filter

.

3

Trouble shooting

Trouble shooting

Malfunctions often have simple explanations. Please 

read the following notes before calling the after-sales 

service.

:

Warning – Risk of electric shock! 

Incorrect repairs are dangerous. Repairs may only be 

carried out and damaged power cables replaced by 

one of our trained after-sales technicians. If the 

appliance is defective, unplug the appliance from the 

mains or switch off the circuit breaker in the fuse box. 

Contact the after-sales service.

Malfunction table

--------

Problem

Possible cause Solution

The appliance 

does not work

The plug is not 

plugged in.

Connect the appliance to the 

electricity supply

Power cut

Check whether other kitchen 

appliances are working

Faulty fuse

Check in the fuse box to make 

sure that the fuse for the appli-

ance is OK

The lighting does 

not work.

The bulbs are 

faulty.

For information on changing 

the bulbs, see the "Replacing 

Bulbs" section.

Summary of Contents for DHU63.HQ













Reviews: