Bosch DID106T50, Instruction Manual

5

Operating the appliance

Note: 

Switch on the extractor hood when you start cooking and 

switch it off again several minutes after you have finished 

cooking. This is the most effective way of removing the kitchen 

fumes.

Controls

Use the remote control to set and adjust the various different 

functions of your appliance.

Note: 

The remote control requires CR2032/3 V batteries. Refer 

to the 

Changing the batteries in the remote control

 section for 

instructions on how to insert the batteries.

Note: 

Point as accurately as you can with the remote control to 

the infrared receiver on the extractor hood's control panel.

Note: 

Heat and penetrating moisture may damage the remote 

control. Never expose the remote control to intense heat or 

moisture.

Remote control

Operating buttons

Extractor hood's control panel

Operating buttons

Switching the appliance on and off

Note: 

Always adjust the setting according to the current 

conditions. To eliminate strong cooking smells, select a high 

fan setting.

Switching on the appliance

Press the 

"

 button on the remote control or the 

#

 button on 

the extractor hood's control panel.
The extractor hood starts at fan setting 1.
Button 1 lights up.

Selecting the fan setting

To apply a fan setting, press the 

@

 or 

A

 button on the remote 

control or button 1, 2 or 3/

G

 for the fan setting you require on 

the extractor hood's control panel.
Button 1 lights up when fan setting 1 has been selected.
Buttons 1 and 2 light up when fan setting 2 has been selected.
Buttons 1, 2 and 3/

G

 light up when fan setting 3 has been 

selected.
Buttons 1 and 2 light up and button 3/

G

 flashes when intensive 

mode has been selected.

Switching off the appliance

Press the 

"

 button on the remote control or the 

#

 button on 

the extractor hood's control panel.

Intensive setting

Activate intensive mode to eliminate strong smells and odours. 

In this mode, the extractor hood operates at its maximum fan 

setting for a short time. After a short time, it automatically 

switches back to a low setting.

Switching on

Press the 

=

 button on the remote control or press and hold 

button 3/

G

 on the extractor hood's control panel.

Buttons 1 and 2 light up and button 3/

G

 flashes. Intensive 

mode is now activated.

Note: 

After 6 minutes, the extractor hood automatically 

switches back to the fan setting that was set beforehand.

Switching off

Press the 

=

 button on the remote control or the 

#

 button on the 

extractor hood's control panel.

Button

Explanation

"

Switch the extractor hood on and off

k

Switch the lighting on and off

=

Switch on intensive mode

K

Switch on the run-on function/intermittent 

function

@

Increase the fan setting

A

Decrease the fan setting

(

Infrared receiver

0

Operating buttons

8

Saturation indicator

Button

Explanation

#

Switches the extractor hood on and off

1

Switches on fan setting 1

2

Switches on fan setting 2

3/

G

Switches on fan setting 3/intensive mode

=

Switches the lighting on and off