background image

3

Gerätebeschreibung

Betriebsarten

Abluftbetrieb:

Der Lüfter der Dunstabzugshaube saugt
den Küchendunst an und 
leitet ihn durch den Fettfilter ins Freie.

Der Fettfilter nimmt die fettigen 
Bestandteile des Küchendunstes auf.

Die Küche bleibt weitgehend frei von
Fett und Geruch.

D

Bei Abluftbetrieb der Dunstabzugs-

haube und gleichzeitigem Betrieb
schornsteinabhängiger Feuerungen

(wie

z. B. Gas-, Öl- oder Kohleheizgeräte,
Durchlauferhitzer, Warmwasserbereiter)

muss für ausreichend Zuluft gesorgt 
werden,

die von der Feuerstätte zur 

Verbrennung benötigt wird.

Ein gefahrloser Betrieb ist möglich, wenn
der Unterdruck im Aufstellraum der 
Feuerstätte von 4 Pa (0,04 mbar) nicht
überschritten wird.

Gebrauchsanweisung:

Beleuchtung

Filter-

gitter

Kamin-

verblendung

Schalter

Licht / Lüfter

Betriebsarten

Dies kann erreicht werden, wenn durch
nicht verschließbare Öffnungen, z. B. in
Türen, Fenstern und in Verbindung mit
Zuluft-/Abluftmauerkasten oder durch
andere techn. Maßnahmen, wie 
gegenseitige Verriegelung o. ä., die 
Verbrennungsluft nachströmen kann.

Bei nicht ausreichender Zuluft besteht
Vergiftungsgefahr durch zurückgesaugte
Verbrennungsgase.

Ein Zuluft-/Abluftmauerkasten allein stellt
die Einhaltung des Grenzwertes nicht
sicher.

Anmerkung: Bei der Beurteilung muss
immer der gesamte Lüftungsverbund der
Wohnung beachtet werden. Bei Betrieb von
Kochgeräten, z. B. Kochmulde und Gas-
herd wird diese Regel nicht angewendet.

Wenn die Dunstabzugshaube im Umluftbe-
trieb – mit Aktivkohlefilter – verwendet wird,
ist der Betrieb ohne Einschränkung 
möglich.

Umluftbetrieb:

Hierzu muss ein Aktivkohlefilter 
eingebaut werden (siehe Filter und 
Wartung).

Das komplette Montage-Set sowie 

die Ersatzfilter können Sie 

beim

Fachhandel 

erwerben.

Die entsprechenden Zubehör-Nummern
finden Sie am Ende dieser Gebrauchs-
anweisung.

Der Lüfter der Dunstabzugshaube saugt
den Küchendunst an und leitet ihn durch
den Fett- und Aktivkohlefilter gereinigt in
die Küche zurück.

Der Fettfilter nimmt die fettigen 
Bestandteile des Küchendunstes auf.

Der Aktivkohlefilter bindet die
Geruchsstoffe.

Wird kein Aktivkohlefilter eingebaut,

können keine Geruchsstoffe des 
Küchendunstes gebunden werden.

Summary of Contents for DKE 66 . .

















Reviews: