6
Removing and inserting the metal grease
filters:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Press the catch on the grease filters
inwards and fold the filters down.
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Warning:
The halogen bulbs must be
switched off and cool.
Inserting the filter:
1.
Remove the metal filters (see "Removing
and inserting the metal grease filters").
2.
Insert the activated carbon filter.
Filters and maintenance
3.
Engage the lug at the front.
4.
Insert the metal grease filters (see
"Removing and inserting the metal
grease filters").
Removing the filter:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Remove the metal filters.
2.
Press in the lug at the front and remove
the activated carbon filter.
2.
Clean the filters.
3.
Insert the clean filters back into the
hood.
3.
Insert the metal grease filters.
Replacing the activated carbon filter:
❑
During normal operation (1 to 2 hours
per day) the activated carbon filters
should be replaced approximately 1 x
year.
❑
A replacement filter can be obtained
from any authorized dealer (see optional
accessories).
❑
Use original filters only.
By doing so you will obtain maximum
performance from your extractor hood.
Disposing of the old activated carbon
filter:
❑
There are no pollutants in the activated
carbon filters. They can therefore be
disposed of as part of your normal
domestic refuse.
