Installation instructions
en
21
6.
Push the fan box to the other side and connect the
pipework.
7.
Position the fan box in the centre and screw it firmly
in place.
8.
Connect the cable.
9.
Press together the cable duct at the sides and at-
tach.
Fitting the filter cover
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
Risk of injury when opening and closing the hinges.
▶
Keep your hands away from the hinges.
1.
Open the hinges on the filter cover.
25
2.
Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
3.
Tighten the fastening screws on the hinges.
4.
Check whether the appliance frame is lying flush.
5
Retighten the screws if necessary.
5.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
6.
Swing the filter cover up and ensure that it engages.
Summary of Contents for DRC97AQ50
Page 23: ......