RAID Subsystem DVA-12T
Changing the Configuration via a Web Browser | en
59
Bosch Sicherheitssysteme GmbH
Quick Installation Guide
F.01U.027.801 | V5 | 2010.06
10
Changing the Configuration via a Web Browser
10.1
Changing an IP Address
The Bosch RAIDWatch application can be used to change the IP address of the subsystem.
The Bosch RAIDWatch application is pre-installed directly on the subsystems drive and can be
accessed with a common standard browser. Alternatively the Bosch RAIDWatch application
can be installed on a host PC (see
Section 11 Using Bosch RAIDWatch on the Host Computer
).
To change an IP address via a Web browser:
1.
Open the Web browser.
2.
Type the unit’s IP address in the address bar, and then click the
Go
button.
A Java Applet is loaded and the Bosch RAIDWatch application starts.
Figure 10.1
Logon screen
3.
In the
IP Address
box, type or select the IP address.
4.
Select the
Enable SSL
check box if you want to use the Secure Sockets Layer (SSL)
security option.
5.
In the
Username
list, click
Configuration
.
6.
In the
Password
box, type the password if needed (factory default: no password).
7.
Click
OK
. The computer opens the Bosch RAIDWatch application.
Figure 10.2
Bosch RAIDWatch application
NOTICE!
If the RAID is deleted or corrupted you need to re-install the Bosch RAIDWatch application on
the system. Rerun the Bosch RAIDWatch setup from your CD, select
Custom
, and then click
Stand-alone
(on Subsystem).
The Java Runtime Environment (JRE) 1.42 or higher is required. Using the web interface, you
have to install the JRE on your PC first. The setup for the JRE is on the CD included with the
product.
