en
Installation
16
6.
Screw the flue duct section to the sides of the
retaining bracket using two screws.
©
7.
Clip the lower flue duct section in at the retaining
bracket. The connection cable must not be
damaged.
ª
Note:
If an air-recirculation optional accessory has been
fitted and the extractor hood is to be operated without a
flue duct, the cable must be wound onto the connector.
Summary of Contents for DWK67BM60B
Page 1: ...en Instructions for installation and use Extractor hood ...
Page 17: ...6 ...
Page 18: ...6 ...
Page 19: ...6 ...