Mounting
Attention!
Do not connect the equipment to the line till all installation works are completed.
The exhaust hood is designed for installation
on a kitchen wall.
Note:
For mounting you may need special
parts.
• In order to simplify the mounting process,
draw a central line on the wall (
1
), attach
the sample so, that its central line was
above the drawn line on the wall, the
bottom of the sample shall be at the
same level, where the bottom of the
exhaust hood shall be after the
installation (
2
).
• With a bore Ш 8 mm make two
perforations and insert there expansion
bolts with hooks (
3
).
• Mount the support of the air conduct
«G» on the wall connected with the
ceiling, use the base support as a
sample for perforation (if available, the
small oval perforation in the support
shall be located above the line, drawn
on the wall), mark with a pencil 2
perforation locations, make perforations
(Ш 8 mm), insert the 2 expansion bolts.
Fix the support base of the air conduct on
the wall with 2 screws 5 x 45 mm (
4
).
• Mount the exhaust hood on the support bases (
5
).
• Adjust the position
(6
).
• Mark the perforations to perform
the final mounting (
7 - 8
).
6
7
8
1
2
3
3
4
5
5
G
14
