Before activating
Attention:
❑
The operating instruction is valid for all
applications of the exhaust hood. Hence,
it may contain description of individual
features which may not be available in
the equipment that you have purchased.
❑
This exhaust hood complies with all
safety requirements.
Maintenance
works shall be performed
exclusively by trained specialists.
Improperly performed maintenance
works can cause grave dangers to the
user.
❑
Before the commissioning of the domestic
item read the operating instructions
attentively. They contain important
information not only about operating and
maintenance of the equipment, but also
about safety of the staff.
❑
Keep the
operating and setting up manual for the
further user of the domestic item.
Utilize the packaging material according
to the valid regulations (see Installation Manual).
This exhaust hood is designed for
domestic use only.
Before performing any operation in
cleaning or maintenance, disconnect the
exhaust hood from the power source,
for this, unplug it of switch off the main
switch in the room.
The tool is not intended to use of
children or physically
or mentally disabled people, or people, who
do not possess sufficient experience and
knowledge, if they are not supervised or if
they
have not been trained to use the tool by
a person, responsible for their safety.
Children shall be supervised and shall
not have access to the tool.
Do not use the exhaust hood if the hood
screen is not installed properly.
It is forbidden to use the exhaust hood
as bearing surface if that is not
specified.
If the exhaust hood is applied
simultaneously with other gas or non-gas
tools, the proper
room ventilation shall be provided.
The air that is pulled by the exhaust
hood must not be extracted through the air
ducts used for extraction of smokes
from gas equipment, or equipment that
works on other inflammable materials.
Extraction hood must not be used for
cooking in open fire.
Open fire may lead to filter damage and
cause inflammation, that is why avoid open
fire.
Deep fat frying shall be performed
under constant control, keeping in mind that
overheated
oil may ignite.
Open parts may heat up if they are used
with cooking tools.
Smoke extraction shall be performed in
strict compliance with the valid regulations
and
local safety regulations.
4
