EN-2
Bosch smart system
2
3
4
5
1
1
Remote
2
Display
3
Battery
4
Charger
5
Drive unit
Charge the battery
• The battery is supplied partially charged. For best performance, fully charge the battery before
riding your e-bike.
• The battery can be charged while installed on the bike or off the bike.
• LEDs indicate the level of battery charge.
•
While the battery is charging, the top LED on the remote and the LEDs on the battery will flash.
On the bike
Off the bike
LEDs flash while battery
is charging. All LEDs
will be lit when fully
charged.
Charge
Each blue = 20%
Each white = 10%
Example
4 blue LEDs
+ 1 white LED
= 81 % to 90% charged
100%
80%
60%
40%
20%
Be safe. Follow these safety warnings when charging your battery:
• Only charge the battery with a Bosch smart system charger. Using the wrong charger risks the life
of the battery and presents a potential fire hazard.
• Only use the charger in dry, indoor areas.
• Do not leave a charging battery unattended.
• When the battery is fully charged, disconnect the charger from the battery and wall socket.
