FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
Configuration | en
31
Bosch Security Systems B.V.
User manual
2022-01 | V01 | F.01U.385.628
4.4.12
Privacy Masks
Privacy Masks
block specific areas of a scene from being seen in the camera's field of view.
This can be useful when public spaces are in the coverage area or monitoring will be limited to
a particular zone.
Pattern
Select the color of the mask as it will appear in the live video:
Black
,
Gray
,
White
or
Custom color
.
To configure a
Privacy mask
:
–
Select the mask number from the drop-down list.
–
Click the plus button.
–
Adjust the mask in the image:
–
Double-click on the edges to add or remove nodes.
–
Click and drag the nodes to position them correctly.
–
Check the
Enabled
check box to activate the related mask.
–
Click the
Set
button to apply the related changes.
To delete a
Privacy mask
:
–
Select the mask number from the drop-down list.
–
Click the trashcan icon.
–
Click the
Set
button to apply the changes.
4.4.13
Audio
You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio transmission on the
'Live'
functions
page. For other connections, the transmission depends on the audio settings of the
respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data is encoded according to the selected format and requires
additional bandwidth. If you do not want any audio data to be transmitted, select
Off
.
Audio
Enable or disable the audio recording option.
Audio input
(Only applicable to FLEXIDOME panoramic 5100i IR: NDS-5703-F360LE, NDS-5704-F360LE)
Select which audio input you want to use. Available options are
Line In
or integrated
Microphone
.
Microphone volume
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Line Out
(Only applicable to FLEXIDOME panoramic 5100i IR: NDS-5703-F360LE, NDS-5704-F360LE)
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Recording format
Select a format for audio recording. The default value is
AAC 48 kbps
. You can select
AAC 80
kbps
, G.711 or L16 depending on the required audio quality or sampling rate.
AAC audio technology is licensed by Fraunhofer IIS.
(
http://www.iis.fraunhofer.de/amm/
)
