Bosch Fornuis HGD745222N, Instruction Manual

18

Care and cleaning

With attentive care and cleaning, your hob and oven will retain 

its looks and remain in good working order for a long time. We 

will explain here how you should care for and clean them 

correctly.

Notes

■

Slight differences in the colours on the front of the oven are 

caused by the use of different materials, such as glass, 

plastic and metal.

■

Shadows on the door panel which look like streaks, are 

caused by reflections made by the oven light.

■

Enamel is baked on at very high temperatures. This can 

cause some slight colour variations. This is normal and does 

not affect operation. The edges of thin trays cannot be 

completely enamelled. As a result, these edges can be 

rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the 

wrong cleaning agent can be avoided by observing the 

following instructions.

When cleaning the hob do not use

■

undiluted washing-up liquid or dishwasher detergent,

■

scouring pads,

■

abrasive cleaning agents such as oven cleaner or stain 

remover,

■

high-pressure cleaners or steam jets.

■

Do not clean individual parts in the dishwasher.

When cleaning the oven do not use

■

sharp or abrasive cleaning agents,

■

cleaning agent with a high alcohol content,

■

scouring pads,

■

high-pressure cleaners or steam jets.

■

Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Zone

Cleaning agent

Stainless steel sur-

faces*
(depending on 

appliance model)

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. On stainless steel surfaces, 

always wipe parallel to the natural grain. 

Otherwise, you may scratch the surface. 

Remove patches and splashes of limes-

cale, grease, starch and albumin (e.g. 

egg white) immediately. Corrosion can 

form under such patches and splashes.
Special care products suitable for hot 

stainless steel surfaces are available 

from our after-sales service and from 

specialist retailers. Apply a thin layer of 

care product with a soft cloth.

Enamel, painted, 

plastic and screen-

printed surfaces*
(depending on 

appliance model)

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. Do not use glass cleaner or 

glass scrapers for cleaning.

Control panel

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. Do not use glass cleaner or 

glass scrapers for cleaning.

* Optional (available for some appliances, depending on the 

appliance model)

Upper glass cover*
(depending on 

appliance model)

Glass cleaner:  

Clean with a soft cloth.  

You can remove the upper glass cover 

for cleaning. To find out how to do this, 

please refer to the section 

Upper glass 

cover

.

Rotary knobs 

Do not remove.

Hot soapy water: 

Clean with a dish cloth and dry with a 

soft cloth. 

Hob surround

Hot soapy water: 

Do not clean with a glass scraper, lemon 

juice or vinegar.

Gas hob and pan 

supports*
(depending on 

appliance model)

Hot soapy water. 

Use very little water. Water must not be 

allowed to enter the appliance through 

the base of the burners. 

Clean off boiled-over liquids and spilt 

food immediately. 

You can remove the pan supports.
Cast iron pan supports*: 

Do not clean in the dishwasher.

Gas burners*
(depending on 

appliance model)

Remove the burner head and cap and 

clean with hot soapy water.  

Do not clean in the dishwasher. 

The gas outlet openings must remain 

unobstructed at all times.  

Ignition plugs: Small, soft brush.  

The gas burners only work properly when 

the ignition plugs are dry. Dry all parts 

thoroughly. Ensure that they are refitted 

correctly.  

The burner caps are coated in black 

enamel. The colour may change over 

time. This does not impair their perfor-

mance.

Electric hotplate*
(depending on 

appliance model)

Abrasive materials or sponges: 

Briefly heat up the hotplate afterwards, 

so that it dries. Hotplates can rust over 

time if they remain wet. Apply care prod-

uct to finish.  

Clean off boiled-over liquids and spilt 

food immediately.

Hotplate ring*
(depending on 

appliance model)

Remove yellow to blue iridescent discol-

ouration from the hotplate ring with a 

steel care product.  

Do not use any abrasive materials that 

may scratch surfaces.

Ceramic hob*
(depending on 

appliance model)

Care: Protective/care products for 

ceramics 

Cleaning: Cleaning agents suitable for 

ceramics.  

Follow the cleaning instructions on the 

packaging.

:

Glass scraper for stubborn dirt: 

Remove the protective cover and clean 

using the blade only. Caution: The blade 

is very sharp. Risk of injury. 

Cover the blade again after cleaning. 

Replace damaged blades immediately.

Zone

Cleaning agent

* Optional (available for some appliances, depending on the 

appliance model)