Avoiding material damage
en
19
Avoiding material damage
2 Avoiding material dam-
age
Avoiding material damage
To avoid material damage to your ap-
pliance, accessories or any other ob-
jects, follow these instructions.
ATTENTION!
Improper use may damage the appli-
ance.
▶
Never wipe over zips, rivets, but-
tons or other hard items.
Treating fabric that is too wet may
cause small burn marks.
▶
Only treat dry or slightly damp fab-
rics.
Fabric may become discoloured if an
area is treated too long.
▶
Always keep the appliance mov-
ing.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
Unpacking and checking
4 Unpacking and check-
ing
Unpacking and checking
Find out here what you need to note
when unpacking the appliance.
4.1 Unpacking the appliance
and parts
1.
Take the appliance out of the
packaging.
2.
Take all other parts and the ac-
companying documents out of the
packaging and place them to
hand.
3.
Remove any packaging material.
4.
Remove any stickers or film.
4.2 Included with the appli-
ance
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
→ Fig.
A
Appliance
B
Protection sleeve
C
Charging cable
D
Power supply unit
E
Accompanying documents
4.3 Charging the appliance
before using for the first
time
▶
Familiarising yourself with your appliance
5 Familiarising yourself
with your appliance
Familiarising yourself with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Plasma treatment area
