English |
7
Bosch Power Tools
1 619 P08 930 | (10.5.10)
Technical Data
Assembly
Changing the Tool (see figure A)
f
Before any work on the machine itself, pull
the mains plug.
Open the key type drill chuck
1
by turning until
the tool can be inserted. Insert the tool.
Insert the chuck key
6
into the corresponding
holes of the key type drill chuck
1
and clamp the
tool uniformly.
Screwdriver Tools (GBM 350 RE)
(see figure B)
When working with screwdriver bits
7
, a univer-
sal bit holder
8
should always be used. Use only
screwdriver bits that fit the screw head.
Replacing the Drill Chuck
For machines without spindle lock, the drill
chuck must be replaced through an authorized
after-sales service agent for Bosch power tools.
The drill chuck must be tightened with a
tightening torque of approx. 25–30 Nm.
Dust/Chip Extraction
f
Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Rotary drill
GBM 350
Professional
GBM 350 RE
Professional
Article number
0 601 13A 0..
0 601 13A 7..
Rated power input
W
350
350
Output power
W
150
150
No-load speed
min
-1
2500
0 –2500
Rated speed
min
-1
1570
0 –1570
Speed control
–
z
Right/left rotation
–
z
Chuck clamping range
mm
1 –10
1 –10
Max. drilling dia.
– Steel
– Wood
– Aluminium
mm
mm
mm
10
20
13
10
20
13
Weight according to EPTA-Procedure 01/2003
kg
1.2
1.2
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-527-004.book Page 7 Monday, May 10, 2010 1:11 PM
