English |
15
Bosch Power Tools
F 016 L81 183 | (28.4.16)
Technical Data
Working Advice
Inspection before work
Before each operation conduct an inspection of the product covering the following steps:
Before use, inspect the input and output sockets, overload re-
set cover, and LCD screen with the on/off button. If damage is
detected, do not use the product.
Before each use examine the product power lead with plug
and that of any auxiliary equipment to be fitted. If damage is
detected, do not use the product; replace the faulty power
lead with plug before use.
Check the product housing inside the frame, the frame unit
and the wheel kits (if applicable). If damage is detected, do
not use the product.
Keep all nuts, bolts and screws tight to be sure that the prod-
uct is in safe working condition.
Ensure that only official Bosch replacement parts are used.
Operation Modes
The product is a device, which can operate in three different
modes:
Inverting mode:
In inverter mode the product is powered by
the on/off button and provides 230 V/AC power to the two
outlet sockets from the internal battery.
Power Unit
GEN 230V-1500
Article number
EEU
UK
CH
0 600 915 000
0 600 915 070
0 600 915 030
Battery chemistry
LiFeYPO4
Lithium Iron
Phosphate
Rated capacity
Wh
1650
Nominal battery voltage
V
16.5
Charging time (100 %)
min
180
Input voltage
V
220–240
Output voltage
– Combined mode
– Inverting mode
V
V
220–240
230
Frequency
Hz
50
Output Power*/**
– Inverting mode
– Combined mode
W
W
1500
1500
Input power*/**
– Charging Power
– Combined mode
W
W
600
1600
Allowable ambient temperature
limits ***
°C
0–40
Cooling
Forced Air
Degree of protection ****
IP 54
Weight according to EPTA-
Procedure 01:2014
kg
42
Protection class
– Charging power
– Inverting mode
– Combined mode
I
II
I
The values given are valid for nominal voltages [U] of
220 – 240 V. For lower voltage and models for specific
countries, these values can vary.
* For extended product life, we recommend that the product
is operated at no higher than 1200 W
** At 1500 W runtime is <2 minutes
*** A higher ambient temperature could shorten the lifespan
of the product- battery
**** The product is only IP54 rated in inverter mode and with
appropriate IP rated EU plug/UK adapter.
Power Unit
GEN 230V-1500
Designation
Daily
Weekly
Monthly
Annually
Inspect product housing, sockets, overload reset
cover, and LCD screen with on/off button and power
cables
Tighten all product underneath screws to frame, hub
plate bolts and wheel nuts (if applicable)
Examine the two wheels with tyres (if applicable)
Cleaning of product using a soft brush
Check the battery charge level
Recharge the product before long term storage*
* If stored longer than 6 months, consider periodically charging the product above 60 %
OBJ_BUCH-2703-003.book Page 15 Thursday, April 28, 2016 11:24 AM
