English - 4
In the case of inadequate vacuuming perform-
ance, check the following:
– Is the vacuum top 3 attached properly?
– Is the vacuum hose system clogged?
– Are the extension wands connected firmly?
– Is the container full?
– Is the dust bag 11 full?
– Is the folded filter 12 clogged with dust?
Emptying at regular intervals ensures optimum
vacuuming performance.
If the vacuuming performance is not achieved
thereafter, take the machine to customer service.
Recycle raw materials instead of disposing as
waste
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Measured values determined according to
EN 23 744 (1.60 m height, 1 m distance).
Typically the A-weighted sound pressure level of
the product is 69 dB (A).
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
GB-Middlesex UB 9 5HJ
✆
Service
............................
+44 (0) 18 95 / 83 87 82
✆
Advice line
....................
+44 (0) 18 95 / 83 87 91
Fax
.............................................
+44 (0) 18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
IRL-Tallaght-Dublin 24
✆
Service
...................................
+353 (0)1 / 414 9400
Fax
....................................................
+353 (0)1 / 459 8030
Australia
Robert Bosch Australia L.t.d.
RBAU/SPT2
1555 Centre Road
P.O. Box 66 Clayton
AUS-3168 Clayton /Victoria
✆
...............................................
+61 (0)1 / 800 804 777
Fax
...............................................
+61 (0)1 / 800 819 520
www.bosch.com.au
E-Mail: CustomerSupportSPT@au.bosch.com
New Zealand
Robert Bosch Limited
14-16 Constellation Drive
Mairangi Bay
Auckland
New Zealand
✆
.....................................................
+64 (0)9 / 47 86 158
Fax
.....................................................
+64 (0)9 / 47 82 914
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 60 335
according to the provisions of the directives
73/23/EEC, 89/336/EEC.
02
Dr. Gerhard Felten
Dr. Eckerhard Strötgen
Senior Vice President Engineering Head of Product Certification
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
Malfunctions
Environmental Protection
Noise Information
Service and Customer Assistance
Declaration of Conformity
13 • 1 609 929 C41 • TMS • 22.05.02