14
| English
Service
u
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
u
Never service damaged battery packs.
Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety instructions for planers
u
Wait for the cutter to stop before setting the tool
down.
An exposed rotating cutter may engage the sur-
face leading to possible loss of control and serious injury.
u
Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding
the workpiece by your hand or against the body leaves it
unstable and may lead to loss of control.
u
Only bring the power tool into contact with the work-
piece when switched on.
Otherwise there is danger of
kickback if the cutting tool jams in the workpiece.
u
Do not allow the chip ejector to come into contact with
your hands.
You may be injured by rotating parts.
u
Never plane over metal objects, nails or screws.
Cut-
ters and cutter shafts could become damaged and cause
increased vibration.
u
Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.
Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u
While working, always hold the planer in such a way
that the planer base plate lies flat against the work-
piece.
Otherwise the planer could slip and cause injury.
u
In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode.
Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u
Do not open the battery.
There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
u
Hold the power tool firmly with both hands and make
sure you have a stable footing.
The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for planing wood-based materials
such as beams and boards while resting firmly on the work-
piece. It is also suitable for chamfering edges and for rebat-
ing.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Knob for setting the cutting depth
(2)
Button for maximising the cutting depth (max. 2 mm)
(3)
Lock-off button for on/off switch
(4)
On/off switch
(5)
Battery
A)
(6)
Battery release button (2x)
A)
(7)
Drawer for spare blades
(8)
Side cutter block guard
(9)
Planer base plate
(10)
Battery charge indicator
(11)
Screw for belt cover
(12)
Belt cover
(13)
Chip ejector (can be inserted on the right-hand or
left-hand side)
(14)
Adjustable planer base plate
(15)
V-groove
(16)
Handle (insulated gripping surface)
(17)
HM/TC planer blade
(18)
Hex key
(19)
Blade head
(20)
Clamping element for planer blade
(21)
Fastening screw for planer blade (2x)
(22)
Extraction hose (dia. 35 mm) (Click & Clean)
A)
(23)
Chip/dust bag
A)
(24)
Dust extraction adapter (Click & Clean)
A)
(25)
Locking device
A)
(26)
Snap fastener
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 4LD | (19.02.2019)
Bosch Power Tools
