English |
15
(15)
Blade head
(16)
Clamping element for planer blade
(17)
Fastening screw for planer blade
(18)
HM/TC planer blade
A)
(19)
Extraction hose (dia. 35 mm)
A)
(20)
Chip/dust bag
A)
(21)
Parallel guide
A)
(22)
Scale for rebate width
A)
(23)
Locking nut for rebate width setting
A)
(24)
Fastening screw for parallel/angle guide
A)
(25)
Angle guide
A)
(26)
Locking nut for angle setting
A)
(27)
Fastening screw for rebate depth guide
A)
(28)
Rebate depth guide
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Planer
GHO 14,4 V-LI
GHO 18 V-LI
Article number
3 601 EA0 4..
3 601 EA0 3..
Rated voltage
V
14.4
18
No-load speed
min
−1
14000
14000
Cutting depth
mm
0−1.6
0−1.6
Rebate depth
mm
0−8
0−8
Max. planing width
mm
82
82
Weight according to EPTA-Procedure 01:2014
kg
2.3−2.5
2.3−3.4
A)
Permitted ambient temperature
– during charging
°C
0 to +45
0 to +45
– during operation
B)
and during storage
°C
−20 to +50
−20 to +50
Recommended batteries
GBA 14,4V...
GBA 18V...
GBA 18V... W
ProCORE 18V...
Recommended chargers
AL 1814 CV
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 18V-..
GAL 3680 CV
GAX 18V-30
AL 3620 CV
AL 1814 CV
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 18V-..
GAL 3680 CV
GAX 18V-30
AL 3620 CV
A)
Depends on battery in use
B)
Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-14
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
85
dB(A); sound power level
96
dB(A). Uncertainty K =
3
dB.
Wear hearing protection
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-14
:
a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Bosch Power Tools
1 609 92A 4PL | (21.02.2019)
