30
| English
F 016 L81 097 | (13.5.15)
Bosch Power Tools
Draining Machine after use
(see figure L)
Disconnect the water hose from the water tap.
Disconnect the lance from the gun.
Direct the gun to the ground and switch on the machine for
operation.
Operate the trigger of the gun and drain all water from the sys-
tem.
CAUTION:
Do not run the machine longer the 25 seconds.
Store the high-pressure washer in a dry place.
CAUTION:
Scaling and frost damages are not covered under
warranty. Remaining water in the machine will freeze at tem-
peratures below 0 °C and destroy the pump. Within climate
zones where temperature can reach 4 °C or below, the ma-
chine must be drained after last use if being stored prior to the
cold season.
Maintenance and Service
Maintenance
Stop, remove plug from the power supply and discon-
nect from water supply.
Note:
To ensure long and reliable service, carry out the follow-
ing maintenance regularly.
Check for obvious defects such as loose fixings, and worn or
damaged components.
Check that covers and guards are undamaged and correctly
fitted. Carry out necessary maintenance or repairs before us-
ing.
We recommend to service the product every 200 (GHP 5-55,
GHP 5-65, GHP 5-65 X, GHP 500 X)/300 (GHP 5-75,
GHP 5-75 X) hours of running time with the authorised Bosch
Service Centre.
Clean the filters periodically once a week. Mention cleaning
with vinegar can remove scales faster. Keep it immersed in
vinegar for 30 mins. (see figures M – N)
Clean the nozzle.
Grease the O rings. (see figure O)
After-sales Service and Application Service
www.bosch-professional.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
No detergent taken in
Adjustable nozzle on high pressure set-
ting
Set nozzle on low pressure setting
Detergent too dense
Dilute with water
High pressure hose extension being used Fit original hose
Deposits or restriction in detergent cir-
cuit
Flush with clean water and eliminate any
restrictions. If the problem persists, con-
tact your Bosch Service Centre.
Problem
Possible Cause
Corrective Action
OBJ_BUCH-2319-003.book Page 30 Wednesday, May 13, 2015 10:35 AM
