Français |
11
Working Advice
u
Only the centre of the laser point or laser line must be
used for marking.
The size of the laser point/the width of
the laser line changes depending on the distance.
Working with the Laser Target Plate
The laser target plate
(22)
improves visibility of the laser
beam in unfavourable conditions and at greater distances.
The reflective surface of the laser target plate
(22)
improves
visibility of the laser line. The transparent surface enables
the laser line to be seen from behind the laser target plate.
Working with the Tripod (Accessory) (see figure F)
A tripod offers a stable, height-adjustable support surface
for measuring. Place the measuring tool on the rotating
platform
(12)
to assemble the measuring tool on a tripod.
Assembly on a 5/8" tripod: Place the rotating platform with
the 5/8" tripod mount
(9)
on the thread of a commercially
available 5/8" tripod
(24)
or a commercially available build-
ing tripod. Tighten the rotating platform using the locking
screw of the tripod.
Assembly on a 1/4" tripod (see figure
F
): Screw the tripod
adapter
(18)
(accessory) into the 5/8" tripod mount
(9)
of
the rotating platform. Place the tripod adapter with the 1/4"
tripod mount on the thread of a 1/4" tripod
(19)
or a com-
mercially available camera tripod. Tighten the tripod adapter
using the locking screw of the tripod.
Roughly align the tripod before switching on the measuring
tool.
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the
light of the laser appear brighter to the eye.
u
Do not use the laser goggles (accessory) as protective
goggles.
The laser goggles make the laser beam easier to
see; they do not protect you against laser radiation.
u
Do not use the laser goggles (accessory) as
sunglasses or while driving.
The laser goggles do not
provide full UV protection and impair your ability to see
colours.
Example applications (see figures B–E)
Examples of possible applications for the measuring tool can
be found on the graphics pages.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
The areas around the outlet aperture of the laser in particular
should be cleaned on a regular basis. Make sure to check for
lint when doing this.
Only store and transport the measuring tool in the protective
pouch
(23)
.
If the measuring tool needs to be repaired, send it off in the
protective pouch
(23)
.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Measuring tools, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of measuring tools or batteries
with household waste.
Only for EU countries:
According to the Directive 2012/19/EU, measuring tools
that are no longer usable, and according to the Directive
2006/66/EC, defective or used battery packs/batteries,
must be collected separately and disposed of in an environ-
mentally correct manner.
Français
Consignes de sécurité
Pour une utilisation sans danger et en toute
sécurité de l’appareil de mesure, lisez atten-
tivement toutes les instructions et tenez-en
compte. En cas de non-respect des pré-
sentes instructions, les fonctions de protection de l’ap-
pareil de mesure risquent d’être altérées. Faites en sorte
que les étiquettes d’avertissement se trouvant sur l’ap-
pareil de mesure restent toujours lisibles. CONSERVEZ
Bosch Power Tools
1 609 92A 4HL | (27.11.2020)
